<menuitem id="tdpdp"></menuitem>

        <menuitem id="tdpdp"></menuitem>

          <menuitem id="tdpdp"></menuitem>

            <big id="tdpdp"></big>

                防靜電國家標準及資料

                2015年05月19日

                防靜電國家標準及資料

                一、國家標準(GB,GB/T,GBJ)

                 GBJ 79-1985           工業企業通信接地設計規范

                 GB 6951-1986           輕質油品裝油安全油面電位值

                 GB/T 6833.3-1987         電子測量儀器電磁兼容性試驗規范靜電放電敏感度試驗

                 GB/T 11210-1989         硫化橡膠抗靜電和導電制品電阻的測定

                 GB 12014-1989          防靜電工作服

                 GB/T 1410-1989          固體電工絕緣材料體積電阻率及表面電阻率試驗方法

                 GB 12158-1990          防止靜電事故通用導則

                 GB/T 12582-1990         液態烴類電導率測定方法 ( 精密靜電計法 )

                 GB/T 12703-1991         紡織品靜電測試方法

                 GB 13348-1992          液體石油產品靜電安全規程

                 GB/T 14288-1993         可燃氣體與易燃液體蒸氣最小靜電點火能測定方法

                 GB/T 50174-1993         計算機機房設計規范

                 GB 4385-1995           防靜電鞋、導電鞋技術要求

                 GB/T 15463-1995         靜電安全名詞術語

                 GB/T 6539-1997          航空燃料與餾分燃料電導率測定法

                 GB/T 2439-2001          硫化橡膠或熱塑性橡膠導電性能和耗散性能電阻率的測定

                 GB/T 2887-2000          電子計算機場地通用規范

                 GB 6950-2001           輕質油品安全靜止電導率

                 GB 4655-2003           橡膠工業靜電安全規程

                二、國家軍用標準(GJB)

                 GJB/Z 25-1991          電子設備和設施的接地、搭接和屏蔽設計指南

                 GJB 1649-1993          電子產品防靜電放電控制大綱

                 GJB 2527-1995          彈藥防靜電要求

                 GJB 2605-1996          柔性熱密封防靜電阻隔材料規范

                 GJB 3007-1997          防靜電工作區技術要求

                 GJB/Z 86-1997          靜電放電防護包裝手冊

                 GJB/Z 105-1998         電子產品防靜電放電控制手冊

                三、電子行業標準(SJ,SJ/T)

                 SJ/T 10147-1991         集成電路防靜電包裝管

                 SJ 20154-1992          信息技術設備靜電放電敏感度試驗

                 SJ/T 10533-1994         電子設備制造防靜電技術要求

                 SJ/T 10630-1995         電子元器件制造防靜電技術要求

                 SJ/T 10694-1996         電子產品制造防靜電系統測試方法

                 SJ/T 11159-1998         地板覆蓋層和裝配地板靜電性能的試驗方法

                 

                國外靜電相關標準 ESD standards

                ESD S1.1:1998—Evaluation, acceptance, and functional
                testing of wrist straps.
                 

                ESD STM2.1:1997
                —Resistance
                test method for electrostatic discharge protective garments.
                 

                ESD STM3.1:2000
                —Ionization. 

                ESD SP3.3:2000
                —Periodic
                verification of air ionizers.
                 

                ESD S4.1:1997
                —Worksurfaces—Resistance measurements. 

                ESD STM4.2:1998
                —Worksurfaces—Charge dissipation characteristics. 

                ANSI/ESD STM5.1:2001
                —Electrostatic
                discharge sensitivity testing—Human body model.
                 

                ANSI/ESD STM5.2:1999
                —Electrostatic
                discharge sensitivity testing—Machine model.
                 

                ANSI/ESD STM5.3.1:1999
                —Charged
                device model (CDM)—Component level.
                 

                ESD S6.1:1999
                —Grounding—Recommended practice. 

                ANSI ESD S7.1:1994
                —Floor
                materials—Resistive characterization of materials.
                 

                ANSI ESD S8.1:1993
                —ESD
                awareness symbols.
                 

                ESD S9.1:1995
                —Resistive
                characterization of footwear.
                 

                ESD SP10.1:2000
                —Automated
                handling equipment.
                 

                ANSI ESD S11.11:1993
                —Surface
                resistance measurement of static dissipative planar materials.
                 

                ESD STM11.12:2000
                —Volume
                resistance measurement of static dissipative planar materials.
                 

                ANSI ESD S11.31:1994
                —Evaluating
                the performance of electrostatic discharge shielding bags.
                 

                ESD STM12.1:1997
                —Seating-resistive
                characterization.
                 

                ESD STM13.1:2000
                —Electrical
                soldering/desoldering hand tools.
                 

                ANSI ESD S20.20:1999
                —Standard
                for the development of an ESD control program.
                 

                ESD STM97.1:1999
                —Floor
                materials and footwear—Resistance in combination with a
                person.
                 

                ESD STM97.2:1999
                —Floor
                materials and footwear voltage measurement in combination with a person.
                 

                AFLCR 65-8:1998
                —Maintenance—Engineering and supply: Electrostatic discharge (ESD) control
                program.
                 

                ANSI C63.14:1998
                —American
                national standard dictionary for technologies of electromagnetic compatibility
                (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD)—Dictionary of EMC/EMP/ESD terms and definitions.
                 

                ANSI C63.16:1993
                —American
                national standard guide for electrostatic discharge test methodologies and
                criteria for electronic equipment.
                 

                ANSI N322:1997
                —American
                national standard inspection, test, construction, and performance requirements
                for direct reading electrostatic/electroscope–type
                dosimeters.
                 

                ANSI T1.308:1996
                —Central
                office equipment—Electrostatic discharge immunity
                requirements.
                 

                ASQ P672:1996
                —Auditing
                ESD and cleanroom processes.
                 

                ASTM D257-78
                —Standard
                test methods for dc resistance or conductance of insulating materials.
                 

                ASTM D991-83
                —Standard
                test method for rubber properties—Volume resistivity of
                electrically conductive and antistatic products.
                 

                ASTM D5077-90:1997
                —Standard
                terminology relating to electrostatic discharge (ESD) packaging materials.
                 

                ASTM E1549-95:2000
                —Standard
                specification for ESD-controlled garments required in cleanrooms and controlled
                environments for spacecraft for nonhazardous and hazardous operations.
                 

                ASTM F150-98
                —Standard
                test method for electrical resistance of conductive and static dissipative
                resilient flooring.
                 

                ASTM F1812-97a
                —Standard
                test method for determining the effectiveness of membrane switch ESD shielding.
                 

                Bellcore GR-1421-CORE:1995
                —Generic
                requirements for ESD-protective circuit packet containers.

                BS 6654:1985—Method for determination of the electrical
                resistivity of textile floor coverings.
                 

                BS EN 100015-2:1994
                —Basic
                specification—Protection of electrostatic-sensitive
                devices—Requirements for low-humidity conditions.
                 

                BS EN 100015-3:1994
                —Basic
                specification—Protection of electrostatic-sensitive
                devices—Requirements for cleanroom areas.
                 

                BS EN 100015-4:1994
                —Basic
                specification—Protection of electrostatic-sensitive
                devices—Requirements for high-voltage environments.
                 

                BS EN 1149-1:1996
                —Protective
                clothing—Electrostatic properties—Surface resistivity (test methods and requirements).
                 

                BS EN 1149-2:1997
                —Protective
                clothing—Electrostatic properties—Test method for measurement of the electrical resistance through a
                material (vertical resistance).
                 

                BS EN 1718:1999
                —Light
                conveyor belts—Test method for the measurement of the
                electrostatic field generated by a running light conveyor belt.
                 

                DI-ATTS-80285B:1997
                —Engineering
                support data (ESD).
                 

                DI-RELI-80669:1992
                —Electrostatic
                discharge (ESD) control program flag.
                 

                DI-RELI-80671:1992
                —Handling
                procedures for electrostatic discharge (ESD) sensitive items.
                 

                EIA 471:1980
                —Symbol
                and label for electrostatic sensitive devices.
                 

                EIA 541:1988
                —Packaging
                material standards for ESD-sensitive items.
                 

                EIA 541:1990
                —Packaging
                of electronic products for shipment.
                 

                EIA 545:1989
                —Electromechanical
                switch test method for electrostatic discharge (ESD).
                 

                EIA 625
                —Handling
                electrostatic discharge sensitive (ESDS) devices.
                 

                EIA-JEP 108
                —Distributor
                requirements for handling electrostatic discharge sensitive (ESDS) devices.
                 

                EOS/ESD EP102:1988
                —Electrostatic
                discharge and electronic equipment: A practical guide for designing to prevent
                ESD problems.
                 

                EOS/ESD EP103:1990
                —ESD
                program management: A realistic approach to continuous, measurable improvement
                in static control.
                 

                EOS/ESD EP105:1995
                —ESD
                in silicon integrated circuits.
                 

                ESD 1:2000
                —General
                practices for ESD control for MR and GMR heads.
                 

                IEC 60801-2:1991
                —Electromagnetic
                compatibility for industrial-process measurement and control equipment—Electrostatic discharge requirements.
                 

                IEC 61000-4-2:1995
                —Electromagnetic
                compatibility (EMC)—Part 4: Testing and measurement
                techniques—Section 2: Electrostatic discharge immunity
                test.
                 

                IEC 61000-4-2:1999
                —Electromagnetic
                compatibility (EMC)—Part 4-2: Testing and measurement
                techniques—Electrostatic discharge immunity test.
                 

                IEC 61087:1991
                —Guide
                for evaluating the discharges from a charged surface.
                 

                IEC 61340-1:1998
                —Electrostatics—Part 1: Guide to the principles of electrostatic phenomena
                (IEC/101/35/CD).
                 

                IEC 61340-2-2TR3:2000
                —Electrostatics—Part 2-2: Measurement methods—Measurement of
                chargeability.
                 

                IEC 61340-2-3:2000
                —Electrostatics—Part 2-3: Methods of test for determining the resistance and
                resistivity of solid planar materials used to avoid electrostatic charge
                accumulation.
                 

                IEC 61340-3-1:1998
                —Electrostatics—Part 3-1: Methods for simulation of electrostatic effects—Human body model (HBM)—Component testing
                (IEC/101/33/CD).
                 

                IEC 61340-3-2:1998
                —Electrostatics—Part 3-2: Methods for simulation of electrostatic effects—Machine model (MM)—Component testing
                (IEC/101/34/CD).
                 

                IEC 61340-4-1:1995
                —Electrostatics—Part 4: Standard test methods for specific applications—Section 1: Electrostatic behavior of floor coverings and installed
                floors.
                 

                IEC 61340-4-3:1999
                —Test
                method for the characterization of electrostatic protective footwear (IEC
                document 101/62/CD).
                 

                IEC 61340-5-1TR2:1998
                —Electrostatics—Part 5-1: Protection of electronic devices from electrostatic
                phenomena—General requirements.
                 

                IEC 61340-5-2TR2:1999
                —Electrostatics—Part 5-2: Protection of electronic devices from electrostatic
                phenomena—User guide.
                 

                IEC/PAS 62162:2000
                —Field-induced
                charged-device model test method for electrostatic discharge withstand
                thresholds of microelectronic components.
                 

                IEC/PAS 62179:2000
                —Electrostatic
                discharge (ESD) sensitivity testing human body model (HBM).

                IEC/PAS 62180:2000—Electrostatic discharge (ESD)
                sensitivity testing machine model (MM).
                 

                IEEE C62.38:1994 (R1999)
                —IEEE
                guide on electrostatic discharge (ESD)—ESD withstand
                capability evaluation methods (for electronic equipment subassemblies).
                 

                IEEE C62.47:1992
                —IEEE
                guide on electrostatic discharge (ESD)—Characterization
                of the ESD environment.
                 

                ISO/DIS 10605:2000
                —Road
                vehicles—Test methods for electrical disturbances from
                electrostatic discharge.
                 

                ISO/TR 10605:1994
                —Road
                vehicles—Electrical disturbances from electrostatic
                discharge.
                 

                JESD 22-A114-B:2000
                —Electrostatic
                discharge (ESD) sensitivity testing human body model (HBM).
                 

                JESD 22-A115-A:1997
                —Electrostatic
                discharge (ESD) sensitivity testing machine model (MM).
                 

                JESD 22-C101-A:2000
                —Field-induced
                charged-device model test method for electrostatic discharge withstand
                thresholds of microelectronic components.

                MIL-PRF-87893B:1997—Workstation—Electrostatic discharge (ESD) control.
                 

                QPL-87893-1:1995
                —Workstation
                electrostatic discharge (ESD) control.
                 

                RAC SOAR 6:1986
                —ESD
                control in the manufacturing environment.
                 

                SAE J551/15:1995
                —Vehicle
                electromagnetic immunity—Electrostatic discharge (ESD).

                 

                來源:萍鄉市盾斯特科技有限公司
                產品名
                價格
                国语自产精品视频二区在,国语自产拍在线观看AV免费,国产午夜精品一区二区三区,国产一卡二卡三卡高清

                    <menuitem id="tdpdp"></menuitem>

                      <menuitem id="tdpdp"></menuitem>

                        <menuitem id="tdpdp"></menuitem>

                          <big id="tdpdp"></big>

                              <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>